Mechanical

INFIHOT – Hot Serving Units

Find a Rep

Ask a Question

Find a Rep Ask a Question

INFIHOT offset top hot serving unit with open base by Atlas Metal

(Single Control with Offset Top)

With striking, yet highly durable features like 16-gauge stainless steel tops and “locking horn” technology, INFINITI FIT is built to evolve with your operation. Choose and customize what you need now, and then easily add it later.

Features

Fully insulated to retain heat – individual, thermostatically controlled 12” x 20” hot food wells
Positive self-locking device – keeps tops level and equipment in place
Fully mobile – each unit is provided with 4” diameter swivel casters, two with brakes
Versatile – available in a wide range of sizes and a wide variety of finishes and colors
US – Undershelf, stainless steel, removable
Wet or dry operation
NSF Approved, UL Listed

Top

Constructed of 16-gauge, type 304 stainless steel, die-formed, welded, ground and polished.
The top is provided with an opening to receive the appropriately sized drop-in unit.

Body

Frame construction shall be of hi-tensile stainless steel square tubing, 1-1/4″ x 1-1/4″.
Frame sections are welded construction, ground and polished to a uniform finish.
Front and end panels shall be constructed of 18-gauge stainless steel with a 1/16”-thick plastic laminate.
Rear aprons shall be constructed of 16-gauge stainless steel with a 1/16”-thick plastic laminate finish.
Owner to specify finish.
An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Hot Food Pan

The cart includes a WIH series built-in hot pan installed in the top.
Constructed of 18-gauge, type 304 stainless steel, with a raised perimeter bead and solid vinyl gasket.1” offset top will accommodate 18” x 26” bun pans.
Individual 12” x 20” hot food wells are provided, fabricated of 18-gauge stainless steel, one piece construction, all welded, ground and polished to a uniform finish.
All corners are coved with a minimum 1/4” radius.
The pan is fully insulated with high density fiberglass insulation, 1” thick on all sides, 2” thick on the bottom and enclosed with a 22-gauge galvanized steel outer case.

Electrical

The unit is provided with 850 watt heating elements, pre-wired to individual thermostat controls, with a pilot light for each well.
A 6’ long, 3-wire cord and plug is provided, extending from the control box located under the unit, on operator’s left.
Bottom of outer case can be removed for access to electrical components.

Casters

The casters shall be 4” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings.
Both casters on operator’s side have toe activated brakes.