Mechanical

BLH-H – Hot Serving Units with Heated Base

Find a Rep Ask a Question
BLH-H heated base serving unit with heated storage base by Atlas Metal

(Optional Drain & Manifold)

For Cafeteria Style with Open Base. This attractive, functional unit keeps hot foods hot—at their peak of serving perfection. Your customers will see, taste and come back for the difference. Pan construction allows for wet or dry operation.

A wide range of attractive plastic laminate colors is available, or urethane-painted panels to blend with any decor.

Quality construction provides years of reliable service. Complete reliability—use as an individual unit or joined in a continuous serving line with our exclusive CAM LOCK™ system.

Features

  • Attractive plastic laminate panels
  • Individually-controlled thermostats
  • High wattage food wells
  • Wet or Dry operation
  • Heated base storage for 12″ x 20″ pans
  • Economical cost
  • CAM LOCK™ system

Top

Constructed of 16-gauge, type 304 stainless steel, die-formed, welded, ground and polished to a uniform finish with rolled front edge.

Body

  • Frame construction shall be of hi-tensile square aluminum tubing, 1-1/4”, with 3-3/4” extruded, vertical radius corners.
  • Frame sections are all welded construction, ground and polished to a uniform finish.
  • Body is complete with front panel, end panels and 8-5/8″ rear apron of 18-gauge stainless steel.
  • Owner to specify laminate finish.
  • CAM LOCK™ locking system included with each unit to align and retain cart positioning, when two or more units are joined.

Hot Serving Unit

  • The cart is complete and includes a hot serving unit installed in the top.
  • Constructed of 18-gauge, type 304 stainless steel.
  • Individual 12″ x 20″ hot food wells are provided, fabricated of 18-gauge stainless steel, one piece construction, all welded, ground and polished to a uniform finish.
  • All corners are coved with a minimum 1/4″ radius.
  • Each well is provided with an 850 watt heating element.
  • The wells can be used with or without water, however, the use of water for a more efficient operation is recommended.

Heated Base

  • Constructed of 20-gauge, type 304 stainless steel interior with coved corners and an 18-gauge stainless steel fascia.
  • There is 1″ of high density fiberglass insulation provided.
  • The interior is provided with a removable pan slide rack assembly to accommodate 12″ x 20″ pans.
  • Doors are stainless steel, double-wall constructed and fully insulated; provided with edge-mounted, chrome-plated hinges, a slam-action latch, a moisture-proof gasket, and a dial thermometer.

Electrical

  • The unit is provided with a prewired single thermostat control for each well, with a pilot light.
  • A 6′-long, 3-wire cord and plug is provided, extending from the control box located centered under the unit.
  • Available for single phase power only.

Casters

  • NSF-approved, 5″ diameter non-marking rubber tired, swivel plate caster with grease fittings.
  • Both casters on the operator’s side have foot-activated brakes.

Models

  • BLH-H-3
  • BLH-H-4
  • BLH-H-5

Resources

Manual

Download

Spec Sheet

Download

CAD File

Download

Revit File

Download

KCL CAD/Revit

Open

Laminate Options

Explore more ways to customize and design the perfect fit for your operation.

Color Options

Find Your Rep Get a Quote