Mechanical

BLH-OT – Hot Serving Units with Offset Top

Find a Rep

Ask a Question

Find a Rep Ask a Question

BLH-OT offset top hot serving unit by Atlas Metal

(Optional Drain & Manifold)

For Cafeteria Style with Open Base. This attractive, functional unit keeps hot foods hot—at their peak of serving perfection. Your customers will see, taste and come back for the difference. Pan construction allows for wet or dry operation.

A wide range of attractive plastic laminate colors is available, or urethane-painted panels to blend with any decor.

Quality construction provides years of reliable service. Complete reliability—use as an individual unit or joined in a continuous serving line with our exclusive CAM LOCK™ system.

Features

Attractive plastic laminate panels
Individually-controlled thermostats
High wattage food wells
Wet or Dry operation
Economical cost
CAM LOCK™ system

Top

Constructed of 16-gauge, type 304 stainless steel, with 1″ offset top, die-formed, welded, ground and polished to a uniform finish with rolled front edge.

Body

Frame construction shall be of hi-tensile square aluminum tubing, 1-1/4”, with 3-3/4” extruded, vertical radius corners.
Frame sections are all welded construction, ground and polished to a uniform finish.
Body is complete with front panel, end panels and 8-5/8″ rear apron of plastic laminate on .050 aluminum.
Owner to specify laminate finish.
CAM LOCK™ locking system included with each unit to align and retain cart positioning, when two or more units are joined.

Hot Serving Unit

The cart is complete and includes a hot serving unit installed in the top.
Constructed of 18-gauge, type 304 stainless steel.
Individual 12″ x 20″ hot food wells are provided, fabricated of 18-gauge stainless steel, one piece construction, all welded, ground and polished to a uniform finish.
1″ offset top will accommodate 18″ x 26″ bun pans. All corners are coved with a minimum 1/4″ radius.
Each well is provided with an 850 watt heating element.
The wells can be used with or without water, however, the use of water for a more efficient operation is recommended.

Electrical

The unit is provided with a prewired single thermostat control for each well, with a pilot light.
A 6′-long, 3-wire cord and plug is provided, extending from the control box located under the unit, on operator’s left.
Available for single phase power only.

Casters

NSF-approved, 5″ diameter non-marking rubber tired, swivel plate caster with grease fittings.
Both casters on the operator’s side have foot-activated brakes.