Mechanical

WCMD-C – Cold Pan

Find a Rep

Ask a Question

Find a Rep Ask a Question

WCMD-C full-depth refrigerated cold pan with side coils by Atlas Metal

(Refrigerated Cold Pan – Full Depth with Side Coils; Non NSF-7)

This full depth cold pan, 9-3/4″, has copper tubing wrapped around its side walls as well as the bottom, to meet the strictest health department codes. The drop-in pan can be installed in virtually any counter and is available as either a fully self-contained unit—just plug it in and turn it on—or as a remote unit when the compressor must be located in a different location.

The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory-applied gasket so that it can be installed in the finest wood fixtures without marring the countertop. The pan is constructed of stainless steel and is provided with a 3/4″ stainless steel drain. The cold pan accommodates standard 12″ x 20″ pans—perfect for any cold food serving application.

Features

Refrigerated copper tubing around the bottom and all sides—meets your toughest health department standards
Fully insulated for maximum efficiency and energy savings
Factory-applied gasket makes installation a snap and seals units with the countertop, thus eliminating seepage
Accommodates your deepest pan or insert—9-3/4″ deep
Accommodates standard 12″ x 20″ pans with the use of separator channel(s), or fractional size pans with the use of optional adapter bars
1-Year Parts & Labor Warranty
NSF Certified (non NSF-7); UL Listed

Top

Constructed of 18-gauge, type 304 stainless steel, die stamped with a raised perimeter bead.
There shall be a solid vinyl gasket under the beaded edge to form a seal with the countertop, thus preventing seepage or marring of the counter top.
Embossed mounting lugs are provided along the inner surface of the top to hold the removable adapters in place.

Liner

The inner liner shall be 18-gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish.
All corners are coved with a minimum 1/4″ radius.
The liner has copper tubing firmly soldered to the exterior bottom and all sides.
A 3/4″ diameter drain with strainer, 4″ PVC nipple, and valve is provided.

Insulation

The pan is fully insulated with high density polystyrene, 1/2″ thick on all sides, 1-1/2″ thick on the bottom and enclosed with a 22-gauge galvanized steel outer case.

Refrigeration System

The compressor housing shall be fabricated from 14-gauge galvanized angles and bolted to the base of the unit.
A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control.
The system is fully charged with CFC-free refrigerant and ready to operate.

Note

Proper ventilation must be provided in counter.

Electrical

The unit is pre-wired with a hot/cold selector switch that prevents dual operation, with the required thermostat controls and pilot light.
The unit is provided with a 6′-long, 3-wire cord and a twist lock plug.