Mechanical

WIH – Hot Pan

Find a Rep

Ask a Question

Find a Rep Ask a Question

WIH drop-in hot food wells with individual controls by Atlas Metal

(Electrically Heated – Individual Control – Optional Drain & Manifold)

The WIH series hot pan is an electrically heated drop-in serving unit that provides the convenience of individually controlled hot food wells, designed for standard 12″ x 20″ steam table pans. The pan construction enables the unit to be used wet or dry and can be specified with drains or a complete drain manifold.

The entire hot pan is efficiently insulated and provided with a factory-applied gasket so that it can be installed in the finest wood fixtures without marring the countertop. All controls are pre-wired to a single cord and plug, and an apron-mounted remote control panel is optional.

Features

Efficiently insulated to retain heat—protects fixtures and saves energy
Individual thermostat controls—the operator can control the temperature of each well separately
Factory-applied gasket—makes installation a snap and seals units to the countertop, thus eliminating seepage
Accommodates standard 12″ x 20″ pans, or fractional size pans
1-Year Parts & Labor Warranty
Wet or Dry operation

Top

Constructed of 18-gauge, type 304 stainless steel, die stamped with a raised perimeter bead.
There shall be a solid vinyl gasket under the beaded edge to form a seal with the countertop, thus preventing seepage or marring of the countertop.

Hot Food Wells

Individual hot food wells shall be 18-gauge type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish.
All corners are coved with a minimum 1/4″ radius.
Each well is provided with an 850 watt heating element (1000 watt on the WIH-1).

Insulated

The pan is fully insulated with high density polystyrene, 1″ thick on all sides, 2″ thick on the bottom and enclosed with a 22-gauge galvanized steel outer liner.

Electrical

The unit is provided with an individual thermostat control with a pilot light for each well.
All heating elements and controls are pre-wired, and a 6′-long, 3-wire cord and plug is provided, extending from the control box located under the unit, on operator’s left.
Available for single phase power only.