Mechanical

CADF – Ice Cream Units

Find a Rep

Ask a Question

Find a Rep Ask a Question

CADF ice cream serving unit with covered freezer compartment by Atlas Metal

(Reach-In)

The ice cream carts let you bring the profitability of reach-in ice cream service to your serving line. Ideal for ice cream or any frozen dessert, this unit can be located anywhere in your serving line. It’s fully self-contained—just plug it in and turn it on.

The attractive streamline design, plus the variety of laminates give you a wide range of choices to complement any decor. The unmatched feature of the CA-Cart line is the self-locking device which eliminates loose fasteners or molding strips to lock units together. Simply push the units together; the carts will automatically lock and the top will be flush and level, regardless of the floor’s condition. It’s the right cart for your serving line needs.

Features

Deep freeze capacity – fully insulated for maximum efficiency and energy savings
Self-contained refrigeration system—just plug it in and turn it on
Positive self-locking device—keeps tops level and equipment in place
Fully mobile—each unit is provided with 5″ diameter swivel casters, two with brakes
Versatile—available in a wide range of sizes and a wide variety of finishes and colors
1-Year Parts & Labor Warranty
NSF Approved
UL Listed

Top

Constructed of 16-gauge, type 304 stainless steel, die-formed, welded, ground and polished.
Top is provided with an opening to receive the appropriate sized drop-in cold serving unit.
An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Body

Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″.
Frame sections are welded construction, ground and polished to a uniform finish.
Body is complete with front panel of plastic laminate on .050 aluminum.
Owner to specify finish.

Deep Freeze Compartment

The cart is complete and includes a WDF series drop-in deep freezer installed in the top.
Constructed of 18-gauge, type 304 stainless steel with raised perimeter bead and solid vinyl gasket.
The unit is fully insulated with 2-1/2″ of high density polystyrene on all sides and enclosed with a 22 gauge galvanized steel outer liner.
The inner liner has copper tubing firmly soldered to its exterior.
The unit is provided with a double pan, insulated lid with a rubber, self-insulating hinge.
The entire lid is removable.

Refrigeration System

The compressor housing shall be fabricated from formed angles and bolted to the base of the unit.
A fully self-contained condensing unit is provided, with hermetically sealed compressor and a thermostat control.
The system is fully charged with CFC-free refrigerant and ready to operate.

Electrical

The unit will be wired for 15-amp, 120-volt, single-phase operation with an on/off switch and pilot light.
A 6′-long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Casters

The casters shall be 5″ diameter non-marking rubber tired, swivel type with ball bearings, in both swivel and axle raceways, and provided with grease fittings.
Both casters on operator’s side have foot-activated brakes.