Mechanical

INFTR – Solid Utility Top Units

Find a Rep

Ask a Question

Find a Rep Ask a Question

(Refrigerated Base)

With striking, yet highly durable features like 16-gauge stainless steel tops and “locking horn” technology, INFINITI FIT is built to evolve with your operation. Choose and customize what you need now, and then easily add it later.

Features

Self-contained refrigeration system – just plug it in and turn it on
Refrigerated base for back up storage
Fully insulated for maximum efficiency and energy savings
Positive self-locking device – keeps tops level and equipment in place
Fully mobile – each unit is provided with 5” diameter swivel casters, two with brakes
Versatile – available in a wide variety of finishes and colors
UL Listed

Top

Constructed of 16-gauge, type 304 stainless steel, die-formed, welded, ground and polished.
The top is provided with an opening to receive the appropriately sized drop-in unit.

Body

Frame construction shall be of hi-tensile stainless steel square tubing, 1-1/4″ x 1-1/4″.
Frame sections are welded construction, ground and polished to a uniform finish.
Front and end panels shall be constructed of 18-gauge stainless steel with a 1/16”-thick plastic laminate.
Rear aprons shall be constructed of 16-gauge stainless steel with a 1/16”-thick plastic laminate finish.
Owner to specify finish.
An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Refrigerated Base

RB Series: Double-wall constructed with a 20-gauge, type 304 stainless steel interior liner, with coved corners.
Cart body forms the exterior of the base with an 18-gauge stainless steel fascia on operator’s side.
The unit is insulated with 1″ of high density polystyrene on all sides.
The interior is provided with a slide assembly to accommodate 12″ x 20″ pans.
A 2-1/2″ dial thermometer is mounted in the fascia.
Doors are double-wall constructed of 18-gauge, type 304 stainless steel, fully insulated with high-density polyurethane, and equipped with edge-mounted, chrome-plated hinges and a slam-action latch.
Doors are complete with a moisture-proof gasket.

Refrigeration System

The compressor housing is integral with the body of the unit.
A fully self-contained condensing unit is provided, with a hermetically sealed compressor and a thermostat control.
The system is provided with a forced-air evaporator which drains into a condensate evaporator, pre-wired into the unit.
The system is fully charged with CFC-free refrigerant and ready to operate.
Two (2) removable louvered access panels are provided.

Electrical

The unit is wired for 15 amp, 120-volt, single-phase operation and is equipped with an on/off thermostat switch and pilot light.

Casters

The casters shall be 5” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings.
Both casters on operator’s side have toe activated brakes.