Mechanical

INFRF – Refrigerated Serving Units

Find a Rep

Ask a Question

Find a Rep Ask a Question

(Frost Top)

With striking, yet highly durable features like 16-gauge stainless steel tops and “locking horn” technology, INFINITI FIT is built to evolve with your operation. Choose and customize what you need now, and then easily add it later.

Features

“Quick,” frost top, stands 1” above counter for attractive display – ideal for pre-plated foods
Fully insulated for maximum efficiency and energy savings
Self-contained refrigeration system – just plug it in and turn it on
Positive self-locking device – keeps tops level and equipment in place
Fully mobile – each unit is provided with 5” diameter swivel casters, two with brakes
US – Undershelf, S/S, removable
Versatile – available in a wide range of sizes and a wide variety of finishes and colors
NSF Approved, UL Listed

Top

Constructed of 16-gauge, type 304 stainless steel, die-formed, welded, ground and polished.
The top is provided with an opening to receive the appropriately sized drop-in unit.

Body

Frame construction shall be of hi-tensile stainless steel square tubing, 1-1/4″ x 1-1/4″.
Frame sections are welded construction, ground and polished to a uniform finish.
Front and end panels shall be constructed of 18-gauge stainless steel with a 1/16”-thick plastic laminate.
Rear aprons shall be constructed of 16-gauge stainless steel with a 1/16”-thick plastic laminate finish.
Owner to specify finish.
An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Refrigerated Frost Top

The cart includes a WF series built-in refrigerated frost top installed in the top.
Constructed of 18-gauge, type 304 stainless steel, with a raised perimeter bead and solid vinyl gasket.
The frost top (plate) is 14-gauge stainless steel with copper tubing firmly soldered to the exterior bottom.
The unit is fully insulated with high density fiberglass and polystyrene, 1-1/2” thick, and enclosed with an 18-gauge galvanized steel outer case.
The top stands 1” above the counter top and is surrounded by a 1/2” full perimeter gutter to collect melted condensate.
A 1” IPS drain is provided.

Refrigeration

The compressor housing shall be fabricated from formed 14-gauge galvanized angles and bolted to the base of the unit.
A fully self-contained condensing unit is provided with a hermetically sealed compressor and an on/off toggle switch.
The system is fully charged with CFC-free refrigerant and ready to operate.

Electrical

The unit is pre-wired for 15-amp., 120-volt, single-phase operation, with an on/off switch and pilot light.
A 6′ long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Casters

The casters shall be 4” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings.
Both casters on operator’s side have toe activated brakes.