Mechanical

INFRM – Refrigerated Serving Units

Find a Rep

Ask a Question

Find a Rep Ask a Question

INFRM recessed cold pan serving unit with open base by Atlas Metal

(3″ Recessed Top; NSF-7)

With striking, yet highly durable features like 16-gauge stainless steel tops and “locking horn” technology, INFINITI FIT is built to evolve with your operation. Choose and customize what you need now, and then easily add it later.

Features

Fully insulated for maximum efficiency and energy savings
Self contained refrigeration system – just plug it in and turn it on
Positive self-locking device – keeps tops level and equipment in place
US – Undershelf, S/S, removable
Fully mobile – each unit is provided with 5” diameter swivel casters, two with brakes
Versatile – available in a wide range of sizes and a wide variety of finishes and colors
UL Listed

Top

Constructed of 16-gauge, type 304 stainless steel, die-formed, welded, ground and polished.
The top is provided with an opening to receive the appropriately sized drop-in unit.

Body

Frame construction shall be of hi-tensile stainless steel square tubing, 1-1/4″ x 1-1/4″.
Frame sections are welded construction, ground and polished to a uniform finish.
Front and end panels shall be constructed of 18-gauge stainless steel with a 1/16”-thick plastic laminate.
Rear aprons shall be constructed of 16-gauge stainless steel with a 1/16”-thick plastic laminate finish.
Owner to specify finish.
An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Refrigerated Cold Pan

The cart includes a RM series built-in refrigerated cold pan installed in the top.
Constructed of 18-gauge, type 304 stainless steel, with raised perimeter bead and solid vinyl gasket.
The pan is fully insulated with high density polystyrene, 1″ thick on all sides, 2″ thick on the bottom and enclosed with a 22-gauge galvanized steel outer case.
The interior liner is fabricated with 1/4″ radius coved corners.
The liner has copper tubing firmly soldered to the top 3″ on all sides.
A 3/4″ diameter drain with strainer, 4″ PVC nipple, and valve is provided.
Separator channels to hold 12” x 20” food pans are included.

Refrigeration System

The compressor housing shall be fabricated from formed 14-gauge galvanized angles and bolted to the base of the unit.
A fully self-contained condensing unit is provided with a hermetically sealed compressor and a digital electronic thermostat/thermometer.
The system is fully charged with CFC-free refrigerant and ready to operate.

Electrical

The unit will be wired for 15 amp., 120 volt, single phase operation, with an on/off thermostat switch and pilot light.
A 6′ long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Casters

The casters shall be 4” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings.
Both casters on operator’s side have toe activated brakes.