Mechanical

CARF – Cold Food Units

Find a Rep

Ask a Question

Find a Rep Ask a Question

CARF open base frost top mobile unit by Atlas Metal

(Refrigerated Frost Top)

The frost cart provides the most attractive way of displaying your pre-plated cold foods. The unit frosts over quickly, provided a bed of snow—the perfect setting for salads and desserts. The unit is fully self-contained and can be located anywhere in your serving line—just plug it in and turn it on.

The attractive streamlined design, plus the variety of laminates, give you a wide range of choices to complement any decor. The unmatched feature of the CA-Cart line is the self-locking device which eliminates loose fasteners or molding strips to lock units together. Simply push the units together; the carts will automatically lock and the top will be flush and level, regardless of the floor’s condition. It’s the right cart for your serving line needs.

Features

“Quick,” frost top, stands 1″ above counter for attractive display—ideal for pre-plated foods
Fully insulated for maximum efficiency and energy savings
Self-contained refrigeration system—just plug it in and turn it on
Positive self-locking device—keeps tops level and equipment in place
Fully mobile—each unit is provided with 5″ dia. swivel casters, two with brakes
Versatile—available in a wide range of sizes and a wide variety of finishes and colors
1-Year Parts & Labor Warranty
NSF Approved
UL Listed

Top

Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished.
Top is provided with an opening to receive the appropriate sized drop-in cold serving unit.
An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Body

Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″.
Frame sections are welded construction, ground and polished to a uniform finish.
Body is complete with front panel of plastic laminate on .050 aluminum.
Owner to specify finish.

Refrigerated Frost Top

The cart is complete and includes a WF series drop-in refrigerated frost top installed in the top. Constructed of 18 gauge, type 304 stainless steel, with raised perimeter bead and solid vinyl gasket.
Frost top is 16 gauge stainless steel and has copper tubing firmly soldered to the exterior bottom; insulated with 1-1/2″ of high density polystyrene and enclosed with an 18 gauge galvanized steel outer liner.
The top stands 1″ above the counter top and is surrounded by 1/2″ full perimeter gutter to collect melted condensate; a 1/2″ IPS drain is provided.

Refrigeration System

The compressor housing shall be fabricated from formed angles and bolted to the base of the unit.
A fully self-contained condensing unit is provided, with hermetically sealed compressor and a thermostat control.
The system is fully charged with CFC-free refrigerant and ready to operate.

Electrical

The unit will be wired for 15 amp, 120 volt, single phase operation with an on/off thermostat switch and pilot light.
A 6′ long, 3-wire cord and plug (NEMA 5-15ISP) will be provided.

Casters

The casters shall be 5″ dia. non-marking rubber tired, swivel type with balls bearings, in both swivel and axle raceways, and provided with grease fittings.
Both casters on operator’s side have foot-activated brakes.