Mechanical

CATR – Cold Food Units

Find a Rep

Ask a Question

Find a Rep Ask a Question

CATR refrigerated serving counter with solid top and enclosed refrigerated base by Atlas Metal

(Solid Top with Refrigerated Base)

The solid cart refrigerated base provides an extra utility top, work top, or display area with the convenience of a refrigerated base. Right where you need it most—at your fingertips. The unit is fully self-contained and can be located anywhere in your serving line—just plug it in and turn it on.

The attractive streamlined design, plus the variety of laminates give you a wide range of choices to complement any decor. The unmatched feature of the CA-Cart line is the self-locking device which eliminates loose fasteners or molding strips to lock units together. Simply push the units together the carts will automatically lock and the top will be flush and level, regardless of the floor’s condition. It’s the right cart for your serving line needs.

Features

Self-contained refrigeration system—just plug it in and turn it on
Refrigerated base for back up storage
Fully insulated for maximum efficiency and energy savings
Positive self-locking device—keeps tops level and equipment in place
Fully mobile—each unit is provided with 5″ diameter swivel casters, two with brakes
Versatile—available in a wide variety of finishes and colors
1-Year Parts & Labor Warranty
UL Listed

Top

Solid top, constructed of 16-gauge, type 304 stainless steel, die-formed, welded, ground and polished to a uniform finish.
An integral locking device shall be provided to align and retain car positioning when to or more carts are joined.

Body

Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″.
Frame sections are welded construction, ground and polished to a uniform finish.
Body is complete with front panel of plastic laminate on .050 aluminum.
Owner to specify finish.

Refrigerated Base

Double wall constructed with a 20-gauge, type 304 stainless steel interior liner, with coved corners.
Cart body forms the exterior of the base with an 18-gauge stainless steel facia on operator’s side.
The unit is insulated with 1″ of high density polystyrene on all sides.
The interior is provided with a slide assembly to accommodate 12″ x 20″ pans.
A 2-1/2″ dial thermometer is mounted in the facia.
Doors are double wall constructed of 18-gauge, type 304 stainless steel, full insulated with high density polyurethane and provided with edge-mounted, chrome-plated hinges and a slam-action latch.
Doors are complete with a moisture-proof gasket.

Electrical Base

The unit will be wired for 15-amp., 120-volt, single-phase operation with an/off thermostat switch and pilot light.
A 6′-long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Casters

The casters shall be 5″ diameter non-marking rubber tired, swivel type with ball bearings, in both swivel and axle raceways, and provided with grease fittings.
Both casters on operator’s side have foot-activated brakes.