Mechanical

WCPT – Display Case

Find a Rep

Ask a Question

Find a Rep Ask a Question

WCPT drop-in refrigerated display case with sliding glass doors by Atlas Metal

(Refrigerated, Pass-Through)

The WCPT series pass-through merchandiser is the ideal display for all your pre-plated or pre-wrapped salads, desserts, and deli products. It’s also the perfect display for bottled juices and specialty drink items. Large sliding, self-closing glass doors on the operator’s side, as well as on the customer’s side, make loading a snap. The large display area is provided with adjustable height shelves and full lighting to enhance product display. The drop-in display case can be installed in virtually any counter and is fully self-contained—just plug it in and turn it on.

The pass-through is fully insulated for maximum efficiency and energy savings. The base of the unit is provided with a factory-applied gasket so that it can be installed in the finest wood fixtures without marring the countertop. The display case is constructed of stainless steel. The refrigeration system includes a forced air evaporator which drains into a condensate evaporator.

Features

Large, lighted display area with adjustable shelves—it’s the ideal merchandiser
Sliding glass doors on customer’s and operator’s side, make loading and self-service move quickly
Forced air evaporator blower system for maximum efficiency in cooling
Factory-applied gasket makes installation a snap and seals units to the countertop, thus eliminating seepage
1-Year Parts & Labor Warranty
UL Listed

Top

Constructed of 18-gauge, type 304 stainless steel die stamped with a raised perimeter bead.
The top is solid, full-length, to support the refrigerated display case.
There shall be a solid vinyl gasket under the beaded edge to form a seal with the countertop, thus preventing seepage or marring of the countertop.

Display Case

Double-wall constructed of type 304 stainless steel – 20 gauge, both interior and exterior, and filled with 2″ of foamed-in-place polyurethane insulation.
Customer’s side and operator’s side are provided with a set of two (2) sliding, self-closing, thermo-pane insulated glass doors.
The doors are removable for ease of cleaning.
The display case is provided with two (2) plastic-coated wire shelves, adjustable on 1″ increments and two (2) sets of fluorescent light fixtures mounted behind plastic guards, which are recessed into the side panels.
The light fixtures are provided with a separate on/off switch.
An internal thermometer is provided.

Refrigeration System

The compressor housing shall be fabricated from 14-gauge galvanized angles and bolted to the base of the unit.
A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control.
The system is also provided with a forced air evaporator for even temperature throughout the display case, and drains into a condensate evaporator pre-wired in the unit.
The system is fully charged with CFC-free refrigerant and ready to operate.

Note

Proper ventilation must be provided in counter.

Electrical

The unit will be wired for 15-amp, 120-volt, single-phase operation with an on/off thermostat switch and pilot light.
A 6′-long, 3-wire cord and plug (NEMA 5-15P) will be provided.