MEPD SERIES – Mobile Enclosed Dish Dispensers
(2, 3 or 4 Stack)
The MEPD Series features an integrally welded aluminum frame with a stainless steel top and side panels. Considered the “best of the rest” solution within the Atlas product portfolio, the MEPD can be used alongside serving lines and is field-adjustable to meet the needs of virtually any foodservice operation.
The MEPD Series offers exceptional flexibility and convenience to adapt to your kitchen’s workflow. Springs can be removed when lighter plates do not provide sufficient weight, or additional springs can be added when greater resistance is required, allowing the dispenser to be customized for a wide range of plate weights and sizes.
Features
- Field adjustable
- Capacity up to 72 plates or 36 bowls (capacity may vary depending on plate or bowl manufacturer)
- UL Commercial Food Warmer label applies to heated units only
- NSF Approved
Top
- Shall be 16-gauge stainless steel, grade 18-8, welded and polished to a #3 finish with heavy duty reinforcements.
Side Panels
- Shall be 18-gauge stainless steel, grade 18-8 #3 finish standard, with .050 panels of aluminum with optional laminate.
Frame
- Shall be constructed of extruded aluminum with 1-1/4″ × 1-1/4″ vertical corner supports, no less than 1/8″ thick.
Dispensing Tube
- The basic unit shall be constructed of 300 Series stainless steel. The countertop flange shall be equipped with three high-impact plastic guide posts to align plates.
- The unit shall be self-supporting, utilizing a formed stainless steel flange welded to vertical channels and a bottom disc.
- A stainless steel platform shall be suspended by extension springs to support the stack of plates being dispensed.
Dispensing Tube Heated
- Same construction with the addition of a base-mounted heating element, a side-mounted thermostat, a pilot light, an on/off switch located in the top flange, and a 6′, 120V NEMA 5-15P cord set.
- An additional stainless steel jacket shall be provided to cover the spring mechanism and channel guides.
Self-Leveling
- The spring mechanism is easy to adjust.
- A combination of extension springs will be provided for field adjustment to the required dispensing height.
Corner Bumpers
- Shall be gray, non-marking vinyl attached securely to frame.
Casters
- Shall be 4″ swivel heavy duty with optional brake.
Models
- MEPD2
- MEPD2H
- MEPD3
- MEPD3H
- MEPD4
- MEPD4H
Resources
Certifications
Laminate Options
Explore more ways to customize and design the perfect fit for your operation.
