Mechanical

MOPD SERIES – Mobile Open Dish Dispensers

Find a Rep

Ask a Question

Find a Rep Ask a Question

MOPD mobile open dish dispenser with two self-leveling plate stacks by Atlas Metal

(2, 3 or 4 Stack)

The MOPD Series frame is constructed of 1″ stainless steel tubing welded to 16-gauge stainless steel upper and lower decks, with heavy-duty reinforcements designed to support the weight of the dish tubes. The heated MOPD model features a receptacle mounted to the underside of the upper deck and includes a 6-foot cord set.

Considered the “best of the rest” within the Atlas product portfolio, the MOPD Series is available in both heated and unheated models. The heated option helps keep dishes warmer for longer, supporting safe food temperatures throughout your operation.

Features

Field adjustable
Capacity up to 72 plates or 36 bowls (capacity may vary depending on plate or bowl manufacturer)
UL Commercial Food Warmer label applies to heated units only
NSF approved

Dispensing Tube Unheated

The basic unit shall be constructed of 300 series stainless steel.
The counter top flange has three, high-impact plastic guide posts to align plates.
The unit is self-supporting using a formed stainless steel flange welded to vertical channels and a bottom disc.
Stainless steel platform will be suspended with extension springs to support the stack of plates to be dispensed.
An additional stainless steel jacket shall be provided to cover the spring mechanism and channel guides.

Dispensing Tube Heated

Same construction with the addition of a base-mounted heating element, a side-mounted thermostat, a pilot light, an on/off switch located in the top flange, and a 6′, 120V NEMA 5-15P cord set.